This product is available for group registration. Learn More

View Important Policies and System Requirements for this course.

This webinar was co-sponsored by ASCE's Structural Engineering Institute (SEI) and ASCE Continuing Education

Instructor:  Alexander Newman, P.E., F.ASCE

View all webinars related to Alexander Newman

Course Length: 1.5 Hours

Purpose and Background

It is impractical to expect that every dimension and every design detail indicated in the construction drawings will be built precisely as shown. Instead, the best we can expect is that the work will be built reasonably close to the drawings, within the established construction tolerances. But which dimensional deviations are acceptable? Where is this information provided? What specifically should the design engineer do to allow the building element to function even when the dimensions are not as shown on the drawings but still within the industry-accepted tolerances? Who is to blame when some component does not fit, and the contractor's work complied with the relevant tolerances? The last issue is unfortunately a common cause of construction problems and claims. This webinar answers these and many other practical questions related to incorporating construction tolerances in the design drawings, with a focus on dimensional tolerances. Specific examples illustrate how tolerances affect structural design details.

Primary Discussion Topics

• The definition of construction tolerances
• Tolerances in structural steel elements
• Concrete tolerances
• Tolerances in masonry construction
• How to deal with conflicting tolerances

Learning Outcomes

Upon completion of this course, you will be able to:

• Locate the information on the acceptable construction tolerances for various materials
• Recognize which specific steps should be taken to incorporate construction tolerances in structural steel, concrete, and masonry buildings
• Become familiar with the tolerances for placement of anchor bolts and embedments in concrete
• Know how far should the outer edge of a steel lintel or a shelf angle be from the exterior face of brick veneer
• Find out how to accommodate tolerances related to camber of steel beams and precast tees

Webinar Benefits

• Understand whether flatness and levelness limits for slabs on grade apply to elevated slabs as well
• Know how masonry tolerances affect the common practice of embedding steel wires and anchors into masonry joints
• Learn about two simple details to assure that the tops of steel beams and open-web steel joists bearing on masonry walls are in alignment
• Find out what can be done if the project requires tighter tolerances than commonly accepted
• Discover how construction tolerances could make a common masonry design approach questionable

Assessment of Learning Outcomes

Students' achievement of the learning outcomes will be assessed via a short post-assessment (true-false, multiple choice and fill in the blank questions).

Intended Audience

• Structural engineers
• Civil engineers
• Building owners

Webinar Outline

• Introduction
• Structural steel tolerances
• Concrete tolerances
• Masonry tolerances
• Conclusion and questions

How to Earn your CEUs/PDHs and Receive Your Certificate of Completion

To receive your certificate of completion, you will need to complete a short on-line post-test and receive a passing score of 70% or higher within 1 year of purchasing the course.

How do I convert CEUs to PDHs?

1.0 CEU = 10 PDHs [Example: 0.1 CEU = 1 PDH]